Process modeling of carbon-epoxy composites: residual stress development during cure and analysis of free edge effects
Abstract
Last decades, increased attention is paid to the deep understanding of the process induced residual stresses (locked-in) and their effect on shape distortion and fracture. Residual stresses evaluation is particularly important in multilayered composites with anisotropic thermo-mechanical properties, where the ply orientations and stacking sequences highly influence the appearing of manufacturing stresses.
In the present study, the effect of free edge on residual stresses inherited during manufacturing of thermoset multilayered composites was investigated. In order to understand the stress-strain state in samples after free edge cut a simplified 2D plane strain finite element analysis was performed. Many phenomena, such as sensitivity of the results to the size of the numerical grid, stress redistribution and size of the area affected by free edge was analyzed.
In the current research, the behavior of AS4/8552-1 carbon-epoxy composite during manufacturing cycle was studied by means of finite element modeling in ABAQUS. To describe the behavior of the composite material during the manufacturing process − including processes of formation, polymerization, development of residual strains and stresses was done by developed user subroutine-UMAT, describing the visco-elastic material behavior of the material. The program was implemented in ABAQUS and validated on the basis of literature data.
The results of the study can be applied for prediction of residual stresses in composite structure by means of virtual simulation and further understanding the nature of fracture of composites.
Keyword : residual stress, composite, free edge
This work is licensed under a Creative Commons Attribution 4.0 International License.
References
Baran, I., Cinar, K., Ersoy, N., Akkerman, R., & Hattel, J. H. (2017). A review on the mechanical modeling of composite manufacturing processes. Archives of Computational Methods in Engineering, 24(2), 365-395. https://doi.org/10.1007/s11831-016-9167-2
Chachad, Y. R., Roux, J. A., Vaughan, J. G., & Arafat, E. (1995). Three-dimensional characterization of pultruded fiberglassepoxy composite materials. Journal Reinforced Plastics and Composites, 14, 495-512. https://doi.org/10.1177/073168449501400506
Fedulov, B. N., Safonov, A. A., Kantor, M. M., & Lomov, S. V. (2017). Modelling of thermoplastic polymer failure in fiber reinforced composites. Composite Structures, 163, 293-301. https://doi.org/10.1016/j.compstruct.2016.11.091
Fedulov, B. N., Safonov, A. A., Sergeichev, I. V., Ushakov, A. E., Klenin, Y. G., & Makarenko, I. V. (2016). Strength analysis and process simulation of subway contact rail support bracket of composite materials. Applied Composite Materials, 23(5), 999-1013. https://doi.org/10.1007/s10443-016-9495-2
Hajikazemi, M., & Van Paepegem, W. (2018). A variational model for free-edge interlaminar stress analysis in general symmetric and thin-ply composite laminates. Composite Structures, 184, 443-451. https://doi.org/10.1016/j.compstruct.2017.10.012
Hexply 8552. (2019). Epoxy matrix product datasheet. Retrieved from https://www.hexcel.com/user_area/content_media/raw/HexPly_8552_eu_DataSheet.pdf
Hu, S., Karpur, P., Matikas, T. E., Shaw, L., & Pagano, N. J. (1995). Free edge effect on residual stresses and debond of a composite fibre/matrix interface. Mechanics of Advanced Materials and Structures, 2(3), 215-225.
Islam, M. S., & Prabhakar, P. (2017). Modeling framework for free edge effects in laminates under thermo-mechanical loading. Composites Part B: Engineering, 116, 89-98. https://doi.org/10.1016/j.compositesb.2017.01.072
Johnston, A. A. (1997). An integrated model of the development of process-induced deformation in autoclave processing of composite structures (PhD thesis). The University of British Columbia, Canada. Retrieved from https://open.library.ubc.ca/cIRcle/collections/ubctheses/831/items/1.0088805
Johnston, A., Vaziri, R., & Poursartip, A. (2001). A plane strain model for process-induced deformation of laminated composite structures. Journal of Composite Materials, 35(16), 1435-1469. https://doi.org/10.1106/YXEA-5MH9-76J5-BACK
Khoun, L., Centea, T., & Hubert, P. (2010). Characterization methodology of thermoset resins for the processing of composite materials − case study: CYCOM 890RTM epoxy resin. Journal of Composites Materials, 44, 1397-1415. https://doi.org/10.1177/0021998309353960
Li, D., Li, X., Dai, J., & Xi, S. (2017). A comparison of curing process-induced residual stresses and cure shrinkage in micro-scale composite structures with different constitutive laws. Applied Composite Materials, 25(5), 1-18.
Mittelstedt, C., & Becker, W. (2007). Free-edge effects in composite laminates. Applied Mechanics Reviews, 60(5), 217-245. https://doi.org/10.1115/1.2777169
Rasuo, B., & Dinulovic, M. (2011). Free-edge stresses in composite laminates under mechanical loading. Paper presented at the 18 th International Conferences on Composite Materials. Retrieved from https://www.researchgate.net/publication/287678229_Free-edge_stresses_in_composite_laminates_under_mechanical_loading
Solis, A., Sánchez-Sáez, S., & Barbero, E. (2018). Influence of ply orientation on free-edge effects in laminates subjected to in-plane loads. Composites Part B: Engineering, 153, 149-158. https://doi.org/10.1016/j.compositesb.2018.07.030
Ushakov, A. E., Safonov, A. A., Sergeichev, I. V., Fedulov, B. N., Kornienko, E. I., Timofeev, M. A., Izotov, A. V., Klenin, Yu. G., & Rozin, N. V. (2015). Design and optimization of a vacuum infusion technological process for hopper car fabrication using polymeric composite materials. Journal of Machinery Manufacture and Reliability, 44(3), 276-282. https://doi.org/10.3103/S105261881503022X
Wijskamp, S., Akkerman, R., & Lamers, E. A. D. (2003). Residual stresses in non-symmetrical carbon-epoxy laminates. In M. J. Martin & H. T. Hahn (Eds.), Proceedings of the 14th International conference on Composite Materials, ICCM14 (pp. 1-10). San Diego, USA.
Zobeiry, N., Forghani, A., Li, C., Gordnian, K., Thorpe, R., Vaziri, R., Fernlund, G., & Poursartip, A. (2016). Multiscale characterization and representation of composite materials during processing. Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, 374, 1-20. https://doi.org/10.1098/rsta.2015.0278