Aspects of complexity of metal-fibrous microstructure for the construction of high-performance heat exchangers: estimation of adhesive strength
Abstract
The paper deals with aspects of the complexity of mechanical properties of porous structures made from copper fibers and fibers reinforced with copper meshes to assess the adhesive strength of the fibrous structure and the cohesion between the components of the tested elements used for the construction of heat exchangers. All of the tested samples were characterized by macroscopic open porosity. The internal structure of the obtained connections was analyzed by metallographic techniques. Statistical relations of the connections made between the layers have been provided. The side effects of the production technology related to the “hydrogen disease” of copper have been discussed.
Keyword : adhesive strength, copper, technology, metal – fibrous structures
How to Cite
Chatys, R. (2020). Aspects of complexity of metal-fibrous microstructure for the construction of high-performance heat exchangers: estimation of adhesive strength. Aviation, 24(3), 117-122. https://doi.org/10.3846/aviation.2020.11978
This work is licensed under a Creative Commons Attribution 4.0 International License.
References
Bar-Cohen, A. A., & Simon, T. W. (1986). Well superheat excursions in the boiling incipience of dielectric fluids. In A. Bar-Cohen (Ed.), Heat transfer in electronic equipment, ASME, HTD, 57, 83–94.
Bohdal, T. (2017). Bubble boiling in flow of refrigerating media. Journal of Mechanical and Energy Engineering, 1, 41(1), 57–64.
Cieśliński, J. T. (1996). Study of nucleate boiling at the surfaces of the porous metal. Scientific Notebook Gdansk University of Technology, LXXVI(547).
Chatys, R., & Wójcik, T. M. (2008). Polish Patent No. PL 202493 “Solar collector absorber coating”.
Chatys, R., & Koruba, Z. (2005). Gyroscope-based control and stabilization of Unmanned Aerial Mini-Vehicle (MINI-UAV). Aviation, IX(2), 10–16. https://doi.org/10.3846/16487788.2005.9635898
Chatys, R., & Orman, Ł. J. (2017). Technology and properties of layered composites as coatings for heat transfer enhancement. Mechanics of Composite Materials, 53(3), 351–360. https://doi.org/10.1007/s11029-017-9666-8
Chatys, R., & Orzechowski, T. (2004). Surface extension in layered structures with the use of metal meshes for heat-transfer enhancement. Mechanics of Composite Materials, 40(2), 159–168. https://doi.org/10.1023/B:MOCM.0000025490.66094.86
Cheng, L., Xia, G., Li, Q., & Thome, J. R. (2018). Fundamental issues, technology development, and challenges of boiling heat transfer, critical heat flux, and two-phase flow phenomena with nanofluids. Heat Transfer Engineering, 7632, 1–36. https://doi.org/10.1080/01457632.2018.1470285
Fang, X., Chen, Y., Zhang, H., Chen, W., Dong, A., & Wang, R. (2016). Heat transfer and critical heat flux of nanofluid boiling: a comprehensive review. Renewable and Sustainable Energy Reviews, 62, 924–40. https://doi.org/10.1016/j.rser.2016.05.047
Gapiński, D., & Stefański, K. (2014). Control of designed target seeker, used in self-guided anti-aircraft missiles, by employing motors with a constant torque. Aviation, 18(1), 20–27. https://doi.org/10.3846/16487788.2014.865943
Good, R. J. (1975). Adhesion science and technology. Plenum Press.
Hussein, A. K. (2015). Applications of nanotechnology in renewable energies a comprehensive overview and understanding. Renewable and Sustainable Energy Reviews, 42, 460–476. https://doi.org/10.1016/j.rser.2014.10.027
Kamel, M. S., & Lezsovits, F. (2018). Simulation of nanofluids laminar flow in a vertical channel. Pollack Period, 13(1), 147–158. https://doi.org/10.1556/606.2018.13.2.15
Kandlikar, S. G., & Grande, W. J. (2003). Evolution of micro-channel flow pasages – termohydraulic performance and fabrication technology. Heat Transfer Engineering, 24(1), 3–17. https://doi.org/10.1080/01457630304040
Klett, W. (2000). Process for making carbon foam. US Patent 6033506.
Kuczyński, W. (2019). Experimental research on condensation of R134a and R404A refrigerants in mini-channels during impulsive instabilities. Part I. International Journal of Heat and Mass Transfer, 128, 728–738. https://doi.org/10.1016/j.ijheatmasstransfer.2018.09.045
Laguerre, O., Amara, S. B., Alvarez, G., & Flick, D. (2008). Transient heat transfer by free convection in a packed bed of spheres: comparison between two modeling approaches and experimental results. Applied Thermal Engineering, 28(1), 14–24. https://doi.org/10.1016/j.applthermaleng.2007.03.014
Leong, K. C., & Jin, L. W. (2008). Study of highly conductive graphite foams in thermal management applications. Advanced Engineering Materials, 10(4), 338–345. https://doi.org/10.1002/adem.200700332
Li, H. Y., & Leong, K. C. (2011). Experimental and numerical study of single and two-phase flow and heat transfer in aluminium foams. International Journal of Heat and Mass Transfer, 54, 4904–4912. https://doi.org/10.1016/j.ijheatmasstransfer.2011.07.002
Liang, G., & Mudawar, I. (2019). Review of pool boiling enhancement by surface modification. International Journal of Heat and Mass Transfer, 128, 892–933. https://doi.org/10.1016/j.ijheatmasstransfer.2018.09.026
Mikielewicz, D., Andrzejczyk, R, Jakubowska, B., & Mikielewicz, J. (2016) Analytical model with nonadiabatic effects for pressure drop and heat transfer during boiling and condensation flows in conventional channels and minichannels, Heat Transfer Engineering, 37(13–14), 1158–1171. https://doi.org/10.1080/01457632.2015.1112213
Orman, Ł. J. (2016). Enhancement of pool boiling heat transfer with pin-fin microstructures. Journal of Enhanced Heat Transfer, 23, 137–153. https://doi.org/10.1615/JEnhHeatTransf.2017019452
Orman, Ł. J. (2020). Aspects of complexity of metal-fibrous microstructure for the construction of high-performance heat exchangers: thermal properties. Aviation (in print, 2020). https://doi.org/10.3846/aviation.2020.12086
Paramonov, Yu. M. (1992). Methods of mathematical statistics in problems on the estimation and maintenance of fatigue life of aircraft structures (in Russian). Publication RIIGA.
Piasecka, M., & Poniewski, M. E. (2016). Heat transfer and pressure drop in minichanels with microstructured surface and various orientation. Encyclopaedias of Two – Phase Heat Transfer and Flow I. Fundamentals and Method, 4: Special Topics in Pool and Flow Boiling, Chapter V, 107–130. J. R. Thome (Ed.). Word Scientific Publishing Co.Pte. Ltd. https://doi.org/10.1142/9789814623216_0031
Poniewski, M. E. (2001). Nucleate boiling on developed micro-surfaces (in Poland). Kielce University of Technology, Kielce.
Pranoto, I., & Leong, K. C. (2014). An experimental study of flow boiling heat transfer from porous structures in a channel. Applied Thermal Engineering, 70(1), 100–114. https://doi.org/10.1016/j.applthermaleng.2014.04.027
Reutskiy, S. Y. (2004). Treffz type method for time-dependent problems. Engineering Analysis with Boundary Elements, 28(1), 13–21. https://doi.org/10.1016/S0955-7997(03)00115-2
Sickfeld, J. (1983). Adhesion aspects of polymeric coating. K. L. Mittal (Ed.). Plenum Press.
Song, L. S., & Chang, H. S. (2015). An experimental study of CHF enhancement of wire nets covered surface in R-134a flow boiling under high pressure and high mass flux conditions. International Journal of Heat and Mass Transfer, 90, 761–768. https://doi.org/10.1016/j.ijheatmasstransfer.2015.07.022
Thome, J. R. (1990). Enhanced boiling heat transfer. Hemisphere.
Vakula, V. L., & Pritykin, L. M. (1984). Physical chemistry adhesion of polymers. Chemistry (in Russian).
Verdy, C., Montavon, G., & Coddet, C. (1998, 25–29 May). On the benavior of thick and porous copper deposits under compressive stress. Proceding of 15th International Thermal Spray Conference (pp. 647–652). Nice, France.
Voyutskii, S. S. (1963). Autohesion and adhesion of high polymers. Wiley.
Zhao, C. Y., Lu, W., & Tassou, S. A. (2009). Flow boiling heat transfer in horizontal metal-foam tubes. ASME J. Heat Transfer, 131(12), 121002-1–121002-7. https://doi.org/10.1115/1.3216036
Zimon, A. D. (1977). Adhesion coating and cover. Chemistry (in Russian).
Bohdal, T. (2017). Bubble boiling in flow of refrigerating media. Journal of Mechanical and Energy Engineering, 1, 41(1), 57–64.
Cieśliński, J. T. (1996). Study of nucleate boiling at the surfaces of the porous metal. Scientific Notebook Gdansk University of Technology, LXXVI(547).
Chatys, R., & Wójcik, T. M. (2008). Polish Patent No. PL 202493 “Solar collector absorber coating”.
Chatys, R., & Koruba, Z. (2005). Gyroscope-based control and stabilization of Unmanned Aerial Mini-Vehicle (MINI-UAV). Aviation, IX(2), 10–16. https://doi.org/10.3846/16487788.2005.9635898
Chatys, R., & Orman, Ł. J. (2017). Technology and properties of layered composites as coatings for heat transfer enhancement. Mechanics of Composite Materials, 53(3), 351–360. https://doi.org/10.1007/s11029-017-9666-8
Chatys, R., & Orzechowski, T. (2004). Surface extension in layered structures with the use of metal meshes for heat-transfer enhancement. Mechanics of Composite Materials, 40(2), 159–168. https://doi.org/10.1023/B:MOCM.0000025490.66094.86
Cheng, L., Xia, G., Li, Q., & Thome, J. R. (2018). Fundamental issues, technology development, and challenges of boiling heat transfer, critical heat flux, and two-phase flow phenomena with nanofluids. Heat Transfer Engineering, 7632, 1–36. https://doi.org/10.1080/01457632.2018.1470285
Fang, X., Chen, Y., Zhang, H., Chen, W., Dong, A., & Wang, R. (2016). Heat transfer and critical heat flux of nanofluid boiling: a comprehensive review. Renewable and Sustainable Energy Reviews, 62, 924–40. https://doi.org/10.1016/j.rser.2016.05.047
Gapiński, D., & Stefański, K. (2014). Control of designed target seeker, used in self-guided anti-aircraft missiles, by employing motors with a constant torque. Aviation, 18(1), 20–27. https://doi.org/10.3846/16487788.2014.865943
Good, R. J. (1975). Adhesion science and technology. Plenum Press.
Hussein, A. K. (2015). Applications of nanotechnology in renewable energies a comprehensive overview and understanding. Renewable and Sustainable Energy Reviews, 42, 460–476. https://doi.org/10.1016/j.rser.2014.10.027
Kamel, M. S., & Lezsovits, F. (2018). Simulation of nanofluids laminar flow in a vertical channel. Pollack Period, 13(1), 147–158. https://doi.org/10.1556/606.2018.13.2.15
Kandlikar, S. G., & Grande, W. J. (2003). Evolution of micro-channel flow pasages – termohydraulic performance and fabrication technology. Heat Transfer Engineering, 24(1), 3–17. https://doi.org/10.1080/01457630304040
Klett, W. (2000). Process for making carbon foam. US Patent 6033506.
Kuczyński, W. (2019). Experimental research on condensation of R134a and R404A refrigerants in mini-channels during impulsive instabilities. Part I. International Journal of Heat and Mass Transfer, 128, 728–738. https://doi.org/10.1016/j.ijheatmasstransfer.2018.09.045
Laguerre, O., Amara, S. B., Alvarez, G., & Flick, D. (2008). Transient heat transfer by free convection in a packed bed of spheres: comparison between two modeling approaches and experimental results. Applied Thermal Engineering, 28(1), 14–24. https://doi.org/10.1016/j.applthermaleng.2007.03.014
Leong, K. C., & Jin, L. W. (2008). Study of highly conductive graphite foams in thermal management applications. Advanced Engineering Materials, 10(4), 338–345. https://doi.org/10.1002/adem.200700332
Li, H. Y., & Leong, K. C. (2011). Experimental and numerical study of single and two-phase flow and heat transfer in aluminium foams. International Journal of Heat and Mass Transfer, 54, 4904–4912. https://doi.org/10.1016/j.ijheatmasstransfer.2011.07.002
Liang, G., & Mudawar, I. (2019). Review of pool boiling enhancement by surface modification. International Journal of Heat and Mass Transfer, 128, 892–933. https://doi.org/10.1016/j.ijheatmasstransfer.2018.09.026
Mikielewicz, D., Andrzejczyk, R, Jakubowska, B., & Mikielewicz, J. (2016) Analytical model with nonadiabatic effects for pressure drop and heat transfer during boiling and condensation flows in conventional channels and minichannels, Heat Transfer Engineering, 37(13–14), 1158–1171. https://doi.org/10.1080/01457632.2015.1112213
Orman, Ł. J. (2016). Enhancement of pool boiling heat transfer with pin-fin microstructures. Journal of Enhanced Heat Transfer, 23, 137–153. https://doi.org/10.1615/JEnhHeatTransf.2017019452
Orman, Ł. J. (2020). Aspects of complexity of metal-fibrous microstructure for the construction of high-performance heat exchangers: thermal properties. Aviation (in print, 2020). https://doi.org/10.3846/aviation.2020.12086
Paramonov, Yu. M. (1992). Methods of mathematical statistics in problems on the estimation and maintenance of fatigue life of aircraft structures (in Russian). Publication RIIGA.
Piasecka, M., & Poniewski, M. E. (2016). Heat transfer and pressure drop in minichanels with microstructured surface and various orientation. Encyclopaedias of Two – Phase Heat Transfer and Flow I. Fundamentals and Method, 4: Special Topics in Pool and Flow Boiling, Chapter V, 107–130. J. R. Thome (Ed.). Word Scientific Publishing Co.Pte. Ltd. https://doi.org/10.1142/9789814623216_0031
Poniewski, M. E. (2001). Nucleate boiling on developed micro-surfaces (in Poland). Kielce University of Technology, Kielce.
Pranoto, I., & Leong, K. C. (2014). An experimental study of flow boiling heat transfer from porous structures in a channel. Applied Thermal Engineering, 70(1), 100–114. https://doi.org/10.1016/j.applthermaleng.2014.04.027
Reutskiy, S. Y. (2004). Treffz type method for time-dependent problems. Engineering Analysis with Boundary Elements, 28(1), 13–21. https://doi.org/10.1016/S0955-7997(03)00115-2
Sickfeld, J. (1983). Adhesion aspects of polymeric coating. K. L. Mittal (Ed.). Plenum Press.
Song, L. S., & Chang, H. S. (2015). An experimental study of CHF enhancement of wire nets covered surface in R-134a flow boiling under high pressure and high mass flux conditions. International Journal of Heat and Mass Transfer, 90, 761–768. https://doi.org/10.1016/j.ijheatmasstransfer.2015.07.022
Thome, J. R. (1990). Enhanced boiling heat transfer. Hemisphere.
Vakula, V. L., & Pritykin, L. M. (1984). Physical chemistry adhesion of polymers. Chemistry (in Russian).
Verdy, C., Montavon, G., & Coddet, C. (1998, 25–29 May). On the benavior of thick and porous copper deposits under compressive stress. Proceding of 15th International Thermal Spray Conference (pp. 647–652). Nice, France.
Voyutskii, S. S. (1963). Autohesion and adhesion of high polymers. Wiley.
Zhao, C. Y., Lu, W., & Tassou, S. A. (2009). Flow boiling heat transfer in horizontal metal-foam tubes. ASME J. Heat Transfer, 131(12), 121002-1–121002-7. https://doi.org/10.1115/1.3216036
Zimon, A. D. (1977). Adhesion coating and cover. Chemistry (in Russian).